There is a silver tube or white I can't really tell from the picture


I think i may buy that one and see.

Oh im sending money for the bracket now. just hold on to it till my Dorf is ready to ship so we don't have to send 2 packages.

Where'd that pic come from? Let me know what shows up. G

I just googled Goodyear 61458 Radiator Hose it is the same hose just made by goodyear instead of Dayco

OK Scratch that IDEA i just got a message back from seller he said that silver thing is just a rendered computer mock up of the hose and it is "Black" only

Just went to O'Reilly auto parts and they have a "Master Pro" part number is 21735 or C1735 it is the same hose as the goodyear or the dayco. got it for 9.99

Man i post alot on this forum... OK so I went to autozone and looked at there hose its a Dayco one.. the Dayco is better than the Master Pro so im going to return the Master Pro and I bought the Dayco today and ordered the filter with the shield on it. Model # 62-1514 1.5in the 62-1513 is 1.26 or something Im sure it will work but i went with the bigger one. 27 bucks

Better how?

the master pro is about 2 inches shorter than the dayco and you can pinch in together like it was a half filled balloon animal. I felt that if it is sucking in air that the hose may collapse. after all the hoses are made for radiator fluid not sucking air.

The dayco hose is longer so you can trim if need be but not tooo short that you would have to buy a dayco anyway. and it is stiffer you actually have to squeeze it for it to collapse.

Thanks for elaborating. I'll keep that in mind when I get mine

So I bought this piece and all the KN filters as well. Forginve me as I am little confused as to what goes where. I mean I know where the big one goes. But on the stock air box there are like 3 of 4 other hoses that connect to it. I am wondering what I do with those. I think they are crank case breathers or something? Any help would be rad.

Thread #1 in the "how to" section tell all about it.

Got my Intake Mount today thx. Ordering the medium K&N filter will get that on the 26th. already bought the big filter and the small one. and bought 2 clamps. I'll post pictures tomorrow and the model number for the clamps for the rest of you.

my new intake


I got some clamps for the Hose Part # KE-28SS From Auto Zone
and I Went with Part # 62-1514 for the filter from Auto Zone as well.

Paypal sent for mount! Thanks!

got my mount today. currently piecing together the rest of the intake and then i'll bend, sand, primer, and paint.

this is a really nice piece. it's pretty heavy lol i didn't realize the metal would be that heavy of a gauge.

Got my intake mount and all installed, great simple design and works well