pan325 GY6 Honda Ruckus: Sweet exhaust & Brembo Parts, Pg 11

alleykat · **Posts:** 2830 **Location:** Houston,TX **Gender:**

Wow didn't know that innova would go on a 10x7.Had lots of peeps on here swear it needed to be on atleast an 8 due to width.Sorry I told ya it wouldn't work.Any heavy sidewall flex?

pan325 · **Posts:** 580 **Location:** Woodlands, Texas **Gender:**

Hey Alex, no problem. I am sure the info was correct since most of the people on here are do it your self people. I just felt that with 20mm more it can be done with a wheel mount. I got it mounted at discount tire. Thanks for picking up my calls and giving me all the useful info, definitely made my build easier.

ZumaSan · **Posts:** 528 **Location:** San Diego **Gender:**

pan325 wrote:

Hey Alex, no problem. I am sure the info was correct since most of the people on here are do it your self people. I just felt that with 20mm more it can be done with a wheel mount. I got it mounted at discount tire for 10 bucks. The tire fit just fine and the discount tire personnel also said it was done easily with no problems. Thanks for picking up my calls and giving me all the useful info, definitely made my build easier.

Looking good. Where did you get your inova tire?

ZumaSan · **Posts:** 528 **Location:** San Diego **Gender:**

alleykat wrote:

Wow didn't know that innova would go on a 10x7.Had lots of peeps on here swear it needed to be on atleast an 8 due to width.Sorry I told ya it wouldn't work.Any heavy sidewall flex?

I was the one that ask you about innova going in a 10x7

....

pan325 · **Posts:** 580 **Location:** Woodlands, Texas **Gender:**

Got the gy6 fired up today. I had some trouble at first. It would crank but wouldn't turnover with a brand new spark plug, so I put in the spark plug that came with the engine and it turnover. The engine would idle for 20-30 seconds and then shut off. I checked the A/F screw on the carb and it took 3 full turns to close. I completely closed the A/F screw, then turn it counter clockwise 1 and 1/2 turn. The engine started, idle okay, and took throttle just fine after that. Next step is to fine tune the carb.

ZumaSan · **Posts:** 528 **Location:** San Diego **Gender:**

Just got my GY6 started last night and about to do the same thing and tune the carb. Any new pic of the bike?

zoomspeed05 · **Posts:** 1862 **Location:** Orlando Florida **Gender:**

how did you get the carb to fit facing the rear? and what link your using? what carb you using? i couldnt get mine to fit facing the rear so i put the long link on and face the carb to the front

pan325 · **Posts:** 580 **Location:** Woodlands, Texas **Gender:**

I just used the shortest link to have the carb facing rear. The carb is gy6 24mm Keihin PD24 carb that came with the engine from rucksters.

ruckus2009 · **Posted:** Sat Aug 06, 2011 9:12 am

Looks tits :banger:

racerx · **Posts:** 2093 **Location:** ATL, GA **Gender:**

Looks great. I love apartment living room builds. It shows initiative :banger:

.

pan325 · **Posts:** 580 **Location:** Woodlands, Texas **Gender:**

Thanks.

daddysmut · **Posts:** 2809 **Location:** Otown fl **Gender:**

nice! lovin' the headlights :wink:

cookiemonster131 · **Posts:** 2475 **Location:** salisbury, nc **Gender:**

this bike is great. i am not a fan of the gas tank but i know it serves a good purpose

pan325 · **Posts:** 580 **Location:** Woodlands, Texas **Gender:**

Thanks guys. I got my headlight setup after I saw daddysmut bike.

pan325 · **Posts:** 580 **Location:** Woodlands, Texas **Gender:**

More shiny parts.


Our motto says it all: "We would like to ride in zoomer which is not easily defeated by anyone."
Members Rides TR ROTM Ride Utility TR Store	Login Register
FAQ Search

pan325 GY6 Honda Ruckus: Sweet exhaust & Brembo Parts, Pg 11

Check out who is online and not out riding.