Errr I need a new safety check on my Ruckus! If this thing don't pass safety check or if I can't get a safety check for it I going back to 50cc and stretch it. And sell my stuff.

Took the ruckus around the block. Muffler is kinda loud but not that loud ^_^
Hoping someone help me get my safety check the easy if not James is willing to let me borrow his stock rear end and electrical.. Hmm if I can't get it before the last week of the end of the month no choice but to tear it up and use the 2nd option which is to use James rear end.
Going safety my truck and wife car's and maybe just give em the papers the same time while he doing my wife's car ^_^ and do the paperwork and give me the stickers ^_^

Breaking in my motor is getting in to me. I might just keep that thing lol
Dang kinda getting annoyed from people gathering on my bike after I go store and come back and people like asking questions and stuff ^_^
I going try get my safety check soon just like it is soon and see what they say to pass it.

I decided to keep it and took it off from CL.
Changing my handle bar set up so I ordered a 16 inch ape hanger handle bar then going measure brake and throttle lines then sell my rpro handle bar and maybe my trail tech speed set up.

How did I got my safety check ^_^

Thrusday: Text James around 530pm check if I can use his bike so I can use it to safety my bike. And he said ok

Dismantle my bike took out the rear frame and electrical

Around 2am I already dismantle my bike and James bike and already put my front end and James rear frame and motor etc etc and ready to go safety check. Stayed up until 430am then went sleep. Woke up 730am and went to my daughter's kindergarten orientation at 8am then went to her class and meet the teacher and fill up etc etc paper works. Then went to get my safety with a right control on the rack lol and passed ^_^ By 11am bought some lunch and ate. Then dismantle my james and my bike. Finished around 300pm waited for james to be home and bring his bike home. Took nap then at 600pm went to the store and buy pupu for some bbq with my compare Richard. Got home and Richard was at my house so I put back my motor and rear and front end together so I can move my bike and have the place to suck em up.
The end
Special thanks again James!
Saturday went shopping with family

Will put my bike together tomorrow then measure new brake and throttle cable so I can order it.

Here is my bike waiting for throttle cable and rear brake line as of now ^_^


Picture is not current ^_^ I already extended my control wires, reinstalled my gas tank, peg leg, etc etc.

Stage 6 fuel gauge, met sender, new battery box and stickers came in but the rear brake line.

Been working on my compare's ride too installed a stem and handle bar, relocated signal light, atr lower seat frame, Mojo 10 inch stretch mount, R6 taillight. Chop the floor board ^_^ will post pics soon ^_^

Awesome, shit looks fierce!

ok this is what i did...




here it is pretty much done.. just need to tuck the rear brake line and replace my vapor temp sensor because i accidently cut it FML! hoping to get a front wire wheel in the future or make another one




also been working on my friend's bike
here a pic ^_^
lowered signal lights and shave bunny ears and atr low seat frame

installed password JDM stem and Phillipines handle bar and a 10 inches mojo strech will set it to 12 1/2 inches soon and may cut the rear tailight out and connect the r6 tai light


here she stand so far ^_^

thanks

I was bored and couldn't go for a ride this weekend so took some pics and run it so the battery no die ^_^
Also my temp sensor came in so I be installing it and tuck my rear brake cable too and may remove The. Stock speedo and put the trail tech up by the handlebar ^_^











.

Sold my 2010 elite 110 was using it for my daily ride to work but now it's gone.
I missed riding to work but I don't want to use my GY6 ruckus because I may wake up somebody in the neighborhood since it's kinda loud at 11:30 pm when I go to work.
So I decided to go back to 49cc until I find another ruckus frame.
So I bought a motor and a SS mojo stock mount and a mini fatty tire set up ^_^ now I need a harness errr hunting hunting. HELP!

Found one harness for $75 hoping he'll rush it to Maui.
Since I going back to 49cc. And don't have another. I may sell my other parts hmmm I still not sure. Oh well I going take apart my GY6 part Thursday and may sell the fatty set for the price I wanted if not it goes in the storage until I find another frame.
I pretty have everything to run the 49cc except the harness so I'll get started soon.

Installing a 2011 451 miles motor, nyc muffler, mini fatty, D variator with malossi ramp plate 6 gram rollers?, lower handle bar or not ^_^

Maybe I should just pick up another Ruckus ^_^ damn too much decision lol

Got all my parts in and made some progress. Just worry about the jetting issue tsk tsk hoping by next week I'll be back on the road ^_^
Will be putting my friend's bike at 12 1/2 stretch too so his air box will be gone. Also installing a SN variator , cutting the tail light out, putting need turn signal on his bike. So I have my hands full next weekend.

how long are your cables man? those apes probably stretched it out alot