Hi all,
I am building a project from scratch with no existing wiring harness. I have a 11 pole stator with the following wire colors: In 1 plug, 1,Pink, 1 yellow, 1 White, 1 Green. It has 1 black w/red loose wire and 1 blue loose wire.
My rectifier is for the 11 pole and I got it from Standard Functions it has the following colors: First plug, 3 Yellows. Second Plug 1 red, 1 green.

I have the pinouts for the cdi just can't find info on what stator wire goes where.
Any help most appreciated.

I too am looking for the same answer. I picked up a 7 wire rectifier and 11 pole stator in town from scrappydogscooters and my stator has the same color wires and doesn't match my rectifier. I was going to try to hook up the 1 yellow wire from the stator to the 3 yellow on the rectifier but am worried about frying something. I'd rather not have to buy another stator if I can get my current one to work.